ADL Plantation Shutters
Adelaide, measured to the millimetre

Custom, Made-to-Measure Shutters, Adelaide

Heritage villas, awkward reveals and non-standard openings are where an off-the-shelf size falls apart and a real on-site measure earns its keep. Share your trickiest windows, get 3 free quotes from vetted Adelaide specialists who template in person, and choose with confidence. We connect you with the trade, we never sell your details to a call centre.

Get 3 free quotes Estimate my cost
Bare, sun-exposed window before, illustrativeBefore
Made-to-measure plantation shutters fitted, illustrativeAfter
Images are illustrative only
Drag to see the transformation. Images are illustrative only, not photos of a specific job.
Where custom work is different

On a special window, the measure is the job

For a plain, square opening almost any supplier will fit well. On a settled villa reveal, an arch or an angled gable, the whole result rides on how carefully the opening is templated. That is the part we make sure you get 3 opinions on.

  • Templated on site to the exact opening, allowing for out-of-square heritage reveals
  • Build-out and face-fit frames create a true mounting surface in deep or uneven reveals
  • Arches, angled gables and raked tops cut to the real angle, not a nearest standard
  • The fit is the vetted specialist's responsibility, not yours
Built for Adelaide's older housing

Villas, cottages, arches and angles

Adelaide's best-loved homes are also its least standard. This is the housing stock where a template measure stops being a nicety and starts being the whole point.

A Unley or North Adelaide villa carries deep double-brick reveals, tall sash windows and a floor that has quietly dropped a few millimetres over 100 years. A specialist templates each opening, checks it for square, and builds a frame to suit rather than forcing a standard box into a gap that is 8mm wider at the top than the bottom.

An Adelaide Hills cottage brings its own quirks: small original openings, thick stone walls, and the occasional raked ceiling in a converted roof space. Angled tops and gable-end triangles are cut to the true rake, and a fixed arched panel can crown a run of operable louvres so the whole window reads as one clean piece.

For example, a splayed bay in a Prospect bungalow needs each panel angled to its own wall, which sits closer to bay window shutters. If your project is more than one awkward window, mention every opening on the form so each quote covers the same scope.

Where custom fits in the range

Custom is a fit, not a material

Made-to-measure describes how the shutter is built for your opening. You still choose the material, and the right one depends on the room. Here is the short version, then explore the detail.

PVC

Waterproof and value-priced. Best for bathrooms, laundries and busy family homes.

From $220 / m² installed, indicative

Explore PVC

Timber

Warm basswood with custom stains. The natural fit for heritage living rooms and bedrooms.

From $350 / m² installed, indicative

Explore Timber

Aluminium

Weatherproof and strong. For alfresco divides and harsh western sun.

From $400 / m² installed, indicative

Explore Aluminium

The closest comparison to custom work is bay window shutters, which take the same precise-measure discipline into angled bays and splayed reveals. For the full picture, start at plantation shutters or price a special-shape job with the cost calculator.

Simple from start to finish

How it works

  1. 01

    Share your windows

    Tell us the rooms, roughly how many windows and the look you want. It takes 2 minutes and there is no obligation.

  2. 02

    Get 3 free quotes

    We match you with up to 3 vetted Adelaide plantation shutter specialists who measure and quote for free.

  3. 03

    Choose with confidence

    Compare price, material and lead time side by side, then choose the specialist who suits you. No pressure, no call centres.

What should a custom job cost?

Standard openings across a typical 3-bedroom Adelaide home run roughly $3,500 to $9,000 fitted. Arches, angled tops and heavily out-of-square reveals carry a complexity uplift on top, because they take longer to template and build. The only accurate figure is a measured quote, and on special shapes comparing 3 is the smartest way to price it. See the full Adelaide cost guide or get an instant estimate with the cost calculator.

  • Vetted, licensed and insured specialists
  • Made to measure, custom fit
  • Adelaide-owned and operated
  • Free, no-obligation quotes
  • No call centres, real local trades

Custom made-to-measure shutters: your questions

Why does a custom shutter need an on-site measure rather than numbers I send over?
Because the numbers almost never tell the full story. Older Adelaide homes settle over decades, so a reveal that reads 900mm at the sill can be 912mm at the head, and a sloping villa floor throws every diagonal out. A specialist templates the opening in person, checks the reveal is square, notes where architraves, latches and window winders sit, and allows for the frame build-out. That is the difference between a shutter that sits flush and one that fouls the handle. On custom work the measure is the job, which is exactly why we send 3 people out to quote it properly.
Can shutters be made for arched windows, angled gables and raked ceilings?
Yes. Arches, half-rounds, sunbursts, triangular gable ends and raked (sloping) tops are all made to measure by specialist manufacturers. A fixed arched panel is common above operable louvres, and angled tops are cut to the exact rake. These shapes cost more per opening and take longer to template and build, so this is precisely the work where comparing 3 quotes protects you, because pricing on special shapes varies widely between suppliers.
My reveals are very deep. Does that change the fit?
Deep reveals, common in double-brick and stone-fronted Adelaide homes, actually suit shutters well because there is room to recess the frame cleanly inside the opening. Where a reveal is too shallow, or out of square, a specialist uses a build-out frame or a face-fit frame to create a true, flat mounting surface. Which approach fits your window is a decision made at the measure, not from a photo, so it is worth having each specialist confirm their frame method in writing.
We are in a heritage-listed area of North Adelaide. Are shutters allowed?
Interior plantation shutters sit inside the window and are not visible as an external streetscape change, so they very rarely trip heritage controls. Anything that alters the external window itself is a different matter. We are not a planning authority and cannot give a ruling, so confirm with your local council before you commit. The specialists we match you with work across Unley, North Adelaide and the Hills regularly and will flag anything that looks like it needs a check.
How far out can a bad measure be, and who carries the cost if it is wrong?
On a made-to-measure shutter the tolerance is millimetres, and a shutter cut too large or too small cannot be trimmed on site like a timber blind. When a vetted specialist measures and manufactures the shutter, the fit is their responsibility, which is the core reason to use a proper measured quote rather than a mail-order or self-measure kit. Ask each quoting specialist directly who owns the remake if a panel does not fit, and get the answer before you sign.
2 minutes, no obligation

Get 3 free quotes from vetted Adelaide specialists

Describe your heritage, arched or awkward windows once and compare up to 3 local quotes side by side. Free, no-obligation, no call centres. Photos of the tricky openings help each specialist scope the job accurately.

Step 1 of 4 · Your windows25%
Material you are leaning toward

Free and no-obligation. We match you to vetted local specialists and never sell your details to a call centre.

Get 3 free quotes